Skip to main content

Our Product

Jet-A1 Fuel Testing

The industry standard recommended equipment for the testing of jet-a1 fuels

Thermometer

ASTM12C/IP64C

Available in safety blue spirit.

Overall length 425mm

Range -20 to +102c

Division 0.2.

Glass Sample Jars (0.5L)

500ml Capacity Suitable For Retaining Weekly Fuel Samples.

Kolor Kut Water Finding Paste

Kolor Kut Paste is used to determine the presence of water in the bottom of oil, diesel, petrol gasoline, fuel oil & kerosine tanks.

Wire Cage for 3.5 Litre Sample Jar

Wire Cage Manufactured to Accommodate the 3.5 Litre Sample Jar, the Cage Is Fitted With Swing over Handle and is Protected by Nylon Coating.

Sample Retention Cans

Sample Retention Cans 2.5 Litre Rectangular Screw Cap Tins, Suitable For Retaining Weekly Fuel Samples, Also Available In Other Sizes.

Shell Water Detector Capsules

Supplied In Boxes Each Box Containing 10 Tubes Of 8 Capsules, The Capsules Are Used To Determine The Presence Of Finely Dispersed Undissolved Water In Jet Fuel At Concentrations Lower Than Normally Detectable By Visual Examination.

Stainless Steel Bucket

With Skirt, Graduated, Complete With Earthing Lead and Clip, Available In 10 Or 12 Litre Capacity (Lids Available As Extra If Required).

Jet A-1 Identification Labels

Available in the following sizes:

75x65mm

340x90mm

750x200mm

Direction of flow available in 270x65mm.

Hydrometer

Made In Accordance With Bs718 Type M50sp Density (G/Ml) At 15 Degree C Range 0.785 To 0.825, Maximum Overall Length 270mm Nominal Range Of Scale G/Ml 0.050 Sub Dividing G/Ml 0.001 Maximum Bulb Diameter 24mm

Syringe 5ml Capacity

All Nylon With Record Nozzle Suitable For Both Manual And Automatic Sampling, Original Type Pull To Draw Sample Into Syringe.

Rectangular Retention Sample Cans (5L)

Complete With Screw Cap for Retaining Weekly Fuel Samples.

Syringe (New Single Hand Operation) 5ml Capacity

Comes with Record Nozzle for Manual Sampling New Type Push Plunger To Draw Sample Into Syringe.

Short Thermometer Sheath

Short metal protective sheath for use with IP49C thermometer. Overall length 350mm

Jet A-1 Millipore Sampling Kit

Jet A-1 Millipore Sampling Kit, Shell field type Millipore Sampling Kit, used for collecting particles in the fuel on site, portable kit.

Jet A-1 Field Testing Kit

Full Portable Complete Quick Jet A1 Testing Kit (Suspended Water) complete with Aluminium carry case, 500ml Glass sample jar, 500ml Tin Storage can, PVC gloves, hydromenter jar, hydrometer 0.775 to 0.825, THERMOMETER ASTM 12c/IP64c, -20 to +102c, nylon syringe, Shell Water Detector capsules and complete with instructions for use.